24-Channel Alarm Annunciator

Description

• Window Light Type: LED
• Color Selection: Quick color change for each channel by replacing white, yellow, red, and green filters
• Selectable fault type: Critical / Non-Critical
• First Alarm indication capability
• Selectable input logic: Normally Open (NO) / Normally Closed (NC)
• Supports ISA 18.1 2C, ISA 18.1 M, ISA 18.1 A, and ISA 18.1 F2A sequence-of-operation standards
• Equipped with 2 Common Alarm outputs in contact form with selectable NO / NC logic
• Individually adjustable ON-delay and OFF-delay for each input
• RS485 port available as an option
• Selectable Reset mode: Automatic or Manual
• Each input can be configured as an Annunciator or Indicator
• Built-in power supply with AC/DC input and automatic protection against short circuit and overtemperature
• Supply Voltage: 24 / 48 / 110 / 125 / 220 V AC/DC
• Isolated channel inputs with the option to select the input voltage independently from the device power supply
• Alarm status indication for Critical / Non-Critical (Maj/Min)
• Auto Horn Off function with adjustable time setting
• Capability to synchronize multiple devices within the same panel or adjacent panels
• Easy panel mounting using two side-mounted brackets
• Easy labeling of windows using transparent film and tracing paper
• Equipped with four operational keys on the front panel:
  • Reset
  • Lamp Test
  • Horn Off / Mute
  • Acknowledge
• Selectable window light colors for Trip and Alarm conditions
• Operating Temperature: -30°C to +70°C
• To save settings, the input connector must first be disconnected from the device. After making and saving the required changes, the connector should be reconnected to the device.